Charnwood W014P Floorstanding Router Table Package

The package consists of;

W014 Router Table

W025 NVR Switch

CE12 Extension Collet 1/2"

A versatile floor standing router table for inverted table routing. Can be used with any 1/4" or 1/2" sized router. The table top is made from a single piece of 35mm thick laminated MDF, to provide a flat and durable surface to work on. The mounting plate is made from a tough plastic which can be drilled to mount any router. The plate is held in place by magnets allowing tool free removal of the router from the table, when making adjustments or changing cutters. Two insert rings allow the diameter of the aperture to be reduced when working with smaller diameter cutters.

Secure clamping of the work piece is achieved by setting the 2 fence mounted featherboards, to hold the work down against the table top and the front featherboard to hold the work up against the fence. Using this method edge mouldings can safely be cut onto small pieces such as beading or picture frames.

For cutting across grain, or tenons, a metal mitre fence is supplied which runs in a T-slot along the front of the table. The mitre fence has stops at 45 degrees each way and at 90 degrees.

This package includes our NVR safety switch to avoid having to reach under the table to start and stop the router. Also included is our collet extension to lift the cutter higher through the table aperture.

Specification

Table Size 800mm x 600mm

Table Apertures 97, 67, 32mm

Table Height 870mm

Dust Outlet 68mm

Dimensions (WxDxH) 800mm x 600mm x 1020mm

Weight 24kg

Warranty 1 Year

Rating Light Trade